Satonat - Finishing Gypsum Plaster

This has a high adhesion characteristics and it is the last layer of polishing plaster under the paint. It may be applied both on the mortar and the plaster surfaces plastered with satin as well as on the gypsum plasterboards.

The Surface and the Setting to be Applied
-It should be free of dirty material such as dust, oil and paint.
-The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
-The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
-It should be paid attention that there is no air current and air circulation at the atmosphere during application.
-The application temperature should be between +5 and +40 ˚C.

APLICATION
6,5 – 7 liters of water is poured down into the mixture bowl; Satonat Plaster is added sprinkling into the water. It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. The prepared mortar is applied on the surface with the help of a steel trowel.

PACKING
Polypropylene bags of 30 kg ( ± 2 %)

STORAGE
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from humidity and condensation. They must be used within 9 months after production date.