Yaponat - Adhesive Plaster Board

It is used for internal thermal isolation applications with adhesion of EPS, XPS, composite plate or rock wool to gypsum plates and during adhesion of gypsum plates to internal space surfaces, such as concrete, bricks, bims block and gross concrete.

The Surface and the Setting to be Applied
-It should be free of dirty material such as dust, oil and paint.
-The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water.
-The surface of the ceilings should be roughened before applying the plaster or undercoated with a material to ensure attachment of the mortar.
-It should be paid attention that there is no air current and air circulation at the atmosphere during application.
-The application temperature should be between +5 and +40 ˚C.

APPLICATION
5 – 5,5 liters of water is poured down into the mixture bowl; 10 kilograms of Yaponat Plaster is added sprinkling into the water. It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. The prepared mortar should be applied to the surface enough intervals in short bursts driven. The bonding process, after the pasted the smoothness of the surface should be checked.

PACKING
Polypropylene bags of 30 kg ( ± 2 %)

STORAGE
At most 20 bags should be stockpiled one on another at a dry place; the bags must not be in contact with the floor and they must be stored protected from humidity and condensation. They must be used within 9 months after production date.